Address
Liyang New Tech Industrial Zone, Changzhou City, Jiangsu, China 213311
INSECT NETTING COMPARISON
40 Mesh vs 50 Mesh Insect Netting: Which Should You Choose?
Compare DAYEE 40 × 25 and 50 × 25 by actual opening, GSM, target pests, crop applications, shade and greenhouse conditions.
QUICK ANSWER
Choose by Pest, Opening and Greenhouse Climate
The two DAYEE products share several commercial specifications, but they serve different decision priorities.
DAYEE 40 × 25
Choose 40 Mesh when ventilation or climate limits 50 Mesh and the project needs vegetables, herbs, flowers, pepper crops or partial whitefly blocking.
- 0.40 × 0.70 mm opening
- 110 GSM / 19% shade
- Partial whitefly blocking
- Climate or ventilation constraints
DAYEE 50 × 25
Choose 50 Mesh when finer exclusion against whiteflies, aphids and leafminer is the priority and the greenhouse can support the selected screen.
- 0.27 × 0.70 mm opening
- 130 GSM / 24% shade
- Whiteflies, aphids and leafminer
- Greenhouse compatibility required
Do not choose by the mesh number alone. Compare the actual 40 × 25 and 50 × 25 openings, the target pest and the greenhouse environment.
MASTER COMPARISON
DAYEE 40 Mesh vs 50 Mesh at a Glance
Compare the approved DAYEE specifications side by side before choosing a screen.
| Specification | DAYEE 40 Mesh | DAYEE 50 Mesh |
|---|---|---|
| Mesh Structure | 40 × 25 | 50 × 25 |
| Density | 16 × 10 / cm | 20 × 10 / cm |
| Approx. Opening | 0.40 × 0.70 mm | 0.27 × 0.70 mm |
| Standard Weight | 110 GSM | 130 GSM |
| Published Air Speed Decrease | 85% | 85% |
| Published Shade Rate | 19% | 24% |
| Main Crop Direction | Vegetables, herbs, flowers, pepper | Greenhouse crops requiring finer exclusion |
| Main Pest Direction | Partial whitefly blocking | Whiteflies, aphids and leafminer |
| Width | 1–6 m | 1–6 m |
| Roll Length | 100–300 m | 100–300 m |
| Material | HDPE Monofilament + UV | HDPE Monofilament + UV |
| Weaving | Leno Weaving | Leno Weaving |
| UV Stability | 700 KLY, ASTM G154 | 700 KLY, ASTM G154 |
| Warranty | Up to 5 Years | Up to 5 Years |
The published Air Speed Decrease values are DAYEE product-comparison data. They are not complete predictions of whole-greenhouse ventilation.
ACTUAL APERTURE
The Key Difference Is the Actual Opening
DAYEE’s 40 Mesh and 50 Mesh products are rectangular 40 × 25 and 50 × 25 structures—not square 40 × 40 and 50 × 50 products.

Conceptual diagram: not drawn to exact photographic scale. Both structures share an approximately 0.70 mm long-side opening; the published short side changes from 0.40 mm to 0.27 mm.

Both have a published long-side opening of approximately 0.70 mm. The main published difference is the short side: approximately 0.40 mm for 40 Mesh and 0.27 mm for 50 Mesh. The 50 × 25 product therefore has the finer short-side opening.
A label such as “40 Mesh” or “50 Mesh” is not a complete technical specification by itself. Buyers should request:
- Mesh structure in both directions
- Actual opening in both directions
- GSM
- Material and UV
- Target pest
- Crop and climate
- Width and roll length

WHEN TO CHOOSE 40 MESH
Choose 40 Mesh When Climate and Ventilation Are Strong Constraints
DAYEE 40 Mesh Anti-Insect Net uses a 40 × 25 structure with an approximately 0.40 × 0.70 mm opening and a standard weight of 110 GSM.
DAYEE / BN positions this product for:
- Vegetables
- Herbs
- Flowers
- Pepper crops
- Partial whitefly blocking where climatic conditions do not allow the use of 50 Mesh
Why buyers choose 40 Mesh
It provides a finer option than 32 Mesh without moving directly to the smaller short-side opening and higher GSM of DAYEE 50 Mesh.
This can be useful when the greenhouse is in a hot or humid region, natural ventilation is important, the crop does not require the finer 50 Mesh opening, or the buyer needs a practical intermediate specification.
Important limitation: DAYEE describes 40 Mesh as providing partial whitefly blocking. It should not be presented as a guaranteed complete barrier against every whitefly species or installation condition.
Performance also depends on pest dimensions, fabric tolerance, installation tension, sealing around doors, vents and edges, damage and maintenance.
WHEN TO CHOOSE 50 MESH
Choose 50 Mesh When Finer Pest Exclusion Is the Priority
DAYEE 50 Mesh Anti-Insect Net uses a 50 × 25 structure with an approximately 0.27 × 0.70 mm opening and a standard weight of 130 GSM.
DAYEE / BN positions this product for:
- Whiteflies
- Aphids
- Leafminer
- Greenhouses and net houses requiring a finer pest barrier
Why buyers choose 50 Mesh
Compared with DAYEE 40 × 25, the short-side opening changes from 0.40 mm to 0.27 mm, density increases from 16 × 10/cm to 20 × 10/cm, standard weight increases from 110 GSM to 130 GSM, and published shade rate increases from 19% to 24%.
This makes 50 Mesh the stronger DAYEE candidate when smaller-pest exclusion is more important than the intermediate 40 Mesh balance.
Important limitation: 50 Mesh should not be described as a universal guarantee.
Actual exclusion depends on pest species and life stage, finished opening tolerance, installation and sealing, damage or stretching, doors and unscreened openings, greenhouse pressure and maintenance.

AIRFLOW, SHADE & CLIMATE
Does 50 Mesh Reduce More Airflow Than 40 Mesh?
Compare the complete product construction and greenhouse vent design rather than relying on nominal mesh count alone.
DAYEE publishes 85% Air Speed Decrease for both standard 40 × 25 and 50 × 25 products.
This means the DAYEE comparison table itself does not support a simple statement that 50 Mesh always has a higher published Air Speed Decrease value.
However, the installed greenhouse may still behave differently because airflow depends on more than one number.
- Screen porosity
- Yarn diameter
- Screen thickness
- Effective screened area
- Vent geometry and vent size
- Installation tension
- Wind
- Exhaust fans
- Dust and cleaning
- Greenhouse structure and shape
- Crop canopy
The 50 Mesh product also has a smaller short-side opening, higher density, higher GSM and a higher published shade rate. These facts require project review, but they do not change DAYEE’s published 85% figure for both standard products.

CLAIM BOUNDARIES
What Each Product Does Not Guarantee
Product selection is one part of a complete pest-exclusion and greenhouse-climate system.
DAYEE 40 Mesh does not guarantee
- Complete whitefly exclusion
- Universal control of aphids, leafminer or thrips
- The same greenhouse airflow in every structure
DAYEE 50 Mesh does not guarantee
- 100% exclusion in every installation
- Universal thrips exclusion
- The same airflow or temperature outcome in every greenhouse
- Success when doors, edges, fans or joints remain unsealed
For thrips-focused projects, confirm the required aperture and validated screen specification rather than assuming standard 50 Mesh is sufficient.
BUYER DECISION CHECKLIST
Five Questions Before You Order
Use these questions to define the technical and commercial requirement before requesting a quotation.
What is the smallest target pest?
The smallest required pest determines the starting aperture.
What actual opening is required?
Compare millimeters in both directions—not only the marketing mesh number.
What crop and climate are involved?
Vegetables, flowers, peppers and nursery crops can have different ventilation and light requirements.
Where will the net be installed?
Sidewalls, roof vents, doors, fan openings and net houses may have different sizing and airflow conditions.
What is the final purchasing specification?
Combine the product structure with complete dimensions, quantity, UV and delivery information.
Provide:
- 40 × 25 or 50 × 25
- Opening
- GSM
- Width × roll length
- Quantity
- UV / warranty requirement
- Packaging
- Destination country or port
PRODUCT SUMMARY
DAYEE 40 Mesh and 50 Mesh Product Summary
The images below are reused from the current Specifications sections of the approved 40 Mesh and 50 Mesh WordPress Drafts.

DAYEE 40 Mesh Anti-Insect Net
- Structure
- 40 × 25
- Opening
- 0.40 × 0.70 mm
- Standard weight
- 110 GSM
- Shade rate
- 19%
- Direction
- Vegetables, herbs, flowers, pepper and partial whitefly blocking

DAYEE 50 Mesh Anti-Insect Net
- Structure
- 50 × 25
- Opening
- 0.27 × 0.70 mm
- Standard weight
- 130 GSM
- Shade rate
- 24%
- Direction
- Whiteflies, aphids and leafminer
BUYER QUESTIONS
40 Mesh vs 50 Mesh Insect Netting FAQ
Approved answers to the most common product-selection questions.
Is 50 Mesh always better than 40 Mesh?
No. 50 Mesh has a finer short-side opening and is positioned for smaller pests, while 40 Mesh is used where crop, climate or ventilation requirements make the finer specification less suitable. The correct choice depends on the target pest and greenhouse.
What is the opening difference between DAYEE 40 and 50 Mesh?
DAYEE 40 × 25 has an approximately 0.40 × 0.70 mm opening. DAYEE 50 × 25 has an approximately 0.27 × 0.70 mm opening.
Which mesh is better for whiteflies?
DAYEE positions 40 Mesh for partial whitefly blocking where climate does not allow 50 Mesh. DAYEE positions 50 Mesh for whiteflies, aphids and leafminer. The final choice should be confirmed against the actual pest and greenhouse conditions.
Which mesh is better for hot climates?
DAYEE 40 Mesh is the option specifically described for situations where climatic or ventilation conditions do not allow 50 Mesh. This does not replace greenhouse ventilation planning.
Why does DAYEE publish the same Air Speed Decrease for both?
The standard DAYEE data lists 85% for both products. Airflow behaviour also depends on product geometry, yarn construction, screen area and greenhouse design. Use the published figures as product-comparison data, not a complete installed-system prediction.
Is 50 Mesh suitable for thrips?
Do not assume it is sufficient for every thrips species or greenhouse. Confirm the required aperture and a validated screen specification for a thrips project.
Can 40 and 50 Mesh be used in the same greenhouse project?
A project may use different specifications for different openings or pest requirements, but the complete exclusion and ventilation system should be reviewed together. Gaps or unscreened openings can reduce overall effectiveness.
What information is needed for a quotation?
Provide the target pest, crop, greenhouse type, climate, installation position, preferred mesh, width × roll length, quantity, UV / warranty requirement, packaging and destination.
MESH SELECTION SUPPORT
Need Help Choosing 40 Mesh or 50 Mesh?
Tell DAYEE your target pest, crop, greenhouse conditions, size and quantity. We will compare the approved 40 × 25 and 50 × 25 specifications and prepare a factory quotation.
