MADE IN-HOUSE · CHECKED BEFORE SHIPMENT

Fence Screen Manufacturing & Quality Control

A reliable fence screen is more than a piece of knitted HDPE fabric. The way its edges are sewn, its grommets are set, and its dimensions and packing are checked all affect what a contractor or distributor receives.

DAYEE produces the fabric and handles cutting, sewing, grommet setting and packing. That gives us practical control over both the mesh and the finished screen—and a clear way to review the details with you before a bulk order ships.

Finished black binding and grommets on fence-screen fabric

Black binding and brass grommets on a finished screen

Fabric and GSM Checks

Confirm the agreed mesh weight and inspect surface appearance.

In-House Finishing

Check binding, stitching, corners and metal grommets.

Order-Specific Verification

Review actual finished sizes, rolls, labels and packing.

Buyer Inspection Options

Request photos, video, inspection records or an arranged visit.

BUYER'S QUALITY CHECKLIST

What Should You Check on a Finished Fence Screen?

A sample can look good at a glance while leaving important questions unanswered. The practical check is whether the fabric, finishing and product identity match the approved order—not whether the seller uses the word “premium.”

Fabric & Weight

Confirm the agreed knitted HDPE construction, visible mesh appearance and fabric weight before accepting the finished screen.

Knitted green HDPE fence-screen fabric and reinforced edge

Black fence-screen binding with several sewn grommet tabs

Binding & Grommets

Review the stitched binding, corners and firmly pressed metal grommets together on a finished panel.

DAYEE sewing workmanship

DAYEE cartons used for distributor and private-label packing

Size & Packing

Ask to see a full screen, close-ups of its finished edges and the actual packed product. Use the checklist below when reviewing a sample, inspection photographs or goods before shipment.

Actual DAYEE cartons prepared for fence-screen supply.

CheckpointWhat to Look ForWhy It Matters
Fabric constructionAgreed knitted tape/tape HDPE specification and an even-looking surfaceConfirms the product family and visual finish you ordered
Fabric GSMWeight verified against a known fabric area, not the weight of a fully packed panelKeeps fabric specification separate from accessories
Color and appearanceAgreed color, consistent presentation and no accepted visible manufacturing defectsHelps batches and repeat orders look coherent
Bound edgesConsistent black webbing, neat parallel stitching, ends trimmedGives the finished panel a defined, repeatable edge
Grommet positionHoles between seam lines, never through the stitchingAvoids cutting the thread that secures the binding
Grommet settingFirm grip; front and back sit properly; no raised edges or burrsHelps avoid loose or badly pressed grommets
Finished sizeHeight and length naturally measured flat, including bindingPrevents confusion between the marketed fence height and actual supplied screen
Identification and packingCorrect size/color labels, packed quantity and agreed presentationHelps distributors receive and separate mixed-size orders

What DAYEE Does: These points correspond to checks we make during fabric preparation, finishing and packing. We can provide relevant close-up photographs and discuss your own inspection priorities before shipping.

FABRIC WEIGHT · CORRECT COMPARISON

How We Check Fence Screen Fabric GSM

Our regular fence privacy screen is 130 GSM knitted HDPE. Some buyers specify another weight for their product range or project, and the agreed figure is checked as a fabric specification.

Circular Fabric Sample

A circular specimen of known area can be cut from the net and weighed. The known area and measured mass allow us to check mass per square meter. We do not use the weight of a finished, bound panel as a substitute for that fabric-only measurement.

Fence-screen fabric detail; fabric appearance does not prove GSM

Known-Size Roll

A roll of known width and length provides another practical way to compare fabric mass with the fabric area. The meaning of the result depends on whether the roll includes a core or other non-fabric components, so the method must not confuse packed weight with GSM.

Green fence-screen fabric wound on a cardboard core

Different MeasurementsWhat They Describe
Fabric GSMGrams per square meter of the net fabric itself
Finished-panel weightMesh plus webbing, thread, grommets and any agreed finishing
Packed-roll weightThe product together with core and/or packing, where present

What DAYEE Does: We can explain which weight applies to your quotation and check the agreed fabric specification without presenting a sample-method illustration as a fabricated laboratory certificate.

Important: GSM is not a universal mathematical conversion to privacy blockage or wind resistance. Coverage depends on actual construction and the confirmed product specification.

KNITTING · SURFACE · COLOR

Fabric Appearance and Knitting Defect Checks

The surface of a large fence screen is visible across a long fence line. Consistent mesh appearance therefore matters as much to the buyer’s finished presentation as it does to our production control.

DAYEE royal blue knitted fence screen material shown by hand

Knitting & Surface Checks

Our regular fabric uses tape/tape knitted virgin HDPE with UV stabilization. We check the net surface and color appearance during production and unwinding for cutting. When visible manufacturing defects are found, affected material is identified and removed from supply rather than being left as an acceptable part of a finished panel or continuous roll.

Royal-blue knitted fence-screen material shown by hand

Repeat Color & Specification

Production continuity also matters. We work from an established specification for repeat standard colors; the familiar Dark Green is one established color, not several different greens created by photograph brightness. A buyer reordering to the same agreed specification should not have to begin a new color-development project every time.

Royal-blue fence-screen fabric in roll production

What DAYEE Does: We keep the specified mesh construction and visual appearance connected to the subsequent cutting and sewing work. Photographs help illustrate the material but do not replace your approved physical color reference where an exact match matters.

IN-HOUSE EDGE FINISHING

Why Binding and Stitching Quality Matter

Good edge finishing is recognizable when the panel is laid out: the webbing follows the edge cleanly, stitching is parallel and tidy, and loose thread ends have been removed. It is not enough to show an impressive roll of fabric if the delivered product is a sewn, grommeted panel.

Our Black Webbing

DAYEE makes its standard black HDPE webbing in-house with UV stabilization. This edge component is part of the intended finished screen, not an unrelated decorative trim.

Black webbing used in fence-screen finishing

DAYEE team sewing beige fence privacy screen panels with reinforced edging

Our Sewing Thread & Seams

We use high-tenacity polyester sewing thread. The sewing team follows established standards for straight, neat parallel stitch lines, consistent binding and trimmed thread ends. We do not claim a specific tested UV-hour rating for the thread without supporting test evidence.

DAYEE sewing team finishing fence-screen panels

Dark-green fence screen corner with black binding and brass grommets

Our Bound Corners

Corners are part of the sewn edge configuration and deserve their own visual inspection. Check the transition from one bound edge to another and the position of grommets near the corner. Ask for actual corner photos and confirm any order-specific reinforcement.

Dark-green fence-screen corner with black binding and brass grommets

What DAYEE Does: Fabric production and finishing take place within the same supply operation, making it practical to match the edge treatment to the panel specification instead of leaving the buyer to find a separate sewing service.

GROMMET POSITION · PRESSING · FINISH

How We Check Brass Grommet Quality

A metal grommet must be more than a shiny detail. Its hole and setting need to work with the surrounding fabric and sewn webbing. If the hole cuts the seam that holds the binding in place, the damaged stitches can loosen. If the setting is loose or poorly pressed, the grommet may work free during use.

Hole Position & Press Firmness

The Hole Must Stay Clear of the Stitching

For our regular sewn panels, the grommet hole is placed between the parallel seam lines, never punched through the sewing thread. This is a basic part of the production standard, not a special upgrade.

The Grommet Must Grip Firmly

After pressing, we check by hand that the grommet is secure and does not rotate loosely in the binding. This is a practical shop-floor check. It is not a published numerical pull-out-strength test.

Fence-screen corner and grommet detail

Dark-green fence privacy screen edge and grommet detail

Back Finish & Order Spacing

The Back Must Be Flat and Properly Formed

We also check the back of the pressed grommet. It should lie properly against the material without an upturned edge, obvious burr, split or other visible pressing defect. A badly pressed grommet is removed and reset immediately at the workstation.

Spacing Must Match the Order

Our regular finished-panel spacing is 24 inches. Other spacing and grommet materials can be discussed for a specific order; don’t treat another supplier’s 12-inch layout or triple-grommet corners as the DAYEE default.

Dark-green fence-screen grommet and edge detail

What DAYEE Does: The same finishing operation checks placement, pressure and appearance before packing. Buyers can ask for close-up views of the front, back and stitched edge to evaluate the quality directly.

Factory vs. Installation: Good grommet setting does not certify a fence’s wind-load capacity. Attachment spacing, excessive tension, support condition and site exposure still matter after installation.

FINISHING CONFIGURATION

Corners, Fixing Spacing and Taller-Screen Reinforcement

The specification of a screen includes where it is fixed and how its edges are finished. Those details should be checked together rather than judged from GSM alone.

For the related site application, see Construction Fence Screen.

Bound Corners & Fixing Spacing

Inspect the webbing, seams and fixing points at the corners, where changes in direction are visible. Reinforcement depends on the agreed construction; a competitor’s multiple-corner-grommet design must not be presented as DAYEE’s standard.

Standard sewn panels commonly use brass grommets spaced every 24 inches. A different material or distance is an order-specific specification and should be recorded before production.

Finished fence-screen corner

Taller Finished Panels

Our regular 7’8″ × 50 ft finished panels commonly include a middle black-webbing reinforcement strip with grommets. This helps provide another fixing line and a more orderly finished presentation when the supporting arrangement uses it. The exact configuration is confirmed for the order.

A 7’8″ × 150 ft raw roll does not automatically include that middle sewn reinforcement. Check whether you are ordering a raw-edged/reinforced-edge roll or a factory-finished long screen.

Middle binding on a taller finished fence-screen panel

What DAYEE Does: We can provide the appropriate panel or roll edge treatment and show its finishing details before you approve the order. We do not assign a certified wind rating to a screen simply because it has a center strip.

SIZE · FINISH · VERIFICATION

Finished Dimensions, Weight and Order Consistency

A fence-height name is not necessarily the measurement of the supplied screen. Our regular finished panels for nominal 6 ft and 8 ft fences are 5’8″ and 7’8″ high respectively; the 4 ft and 5 ft products in our range are their stated actual screen heights. Custom requirements are quoted to the finished dimensions you approve.

For measuring guidance, see our Fence Screen Size Guide.

Black finished fence screen with sewn binding and brass grommets

Actual Finished Dimensions

Finished panel measurements include the sewn binding. We measure the panel naturally laid flat and check the agreed finished height and length. If a strict maximum height applies, tell us before production so the order specification reflects it. Any allowance or intended adjustment is agreed for that order rather than quietly imposed on every buyer.

Black finished fence screen with sewn binding and brass grommets

Finished Weight vs. Fabric GSM

We also weigh completed items as finished products. That verification is different from checking the GSM of the unbound fabric.

Order Specification Consistency

Confirm each finished height, length, seam and grommet position against the agreed order before packing.

Finished-Item CheckWhat Is Confirmed
Height and lengthAgreed actual finished dimensions, including binding
Seam and edge patternThe sewing and reinforcement specified for that size
Grommet layoutMaterial, placement and spacing for the order
Finished item weightWeight of the finished article, distinct from fabric GSM
Color and appearanceApproved visual specification and surface condition

What DAYEE Does: You can send a mixed size list; we use the agreed finished measurements for manufacturing and product identification. See the Size & Measuring Guide for actual screen heights.

LONG ROLLS · EDGE CONFIGURATIONS

Quality Checks for Continuous Fence Screen Rolls

Some customers order finished 50 ft panels, while others buy continuous 150 ft rolls for direct use or local fabrication. These are different supply forms and need different finishing checks.

See the Fence Privacy Screen Rolls page for roll formats.

Green fence screen roll partly unrolled to show fabric

Continuous, Unspliced Supply

Our delivery requirement for rolls is one continuous usable length, not shorter pieces sewn or joined together. If a visible manufacturing defect is identified while a jumbo roll is divided, the affected section is removed. Suitable remaining fabric can be checked and used for shorter products; defective material is not delivered as an acceptable short panel.

Green fence-screen roll partly unrolled

Knitted openings along a green fence screen edge

Three Edge Choices

Depending on the order, a long roll can have dense knitted reinforced long edges; reinforced long edges with knitted eyelets; or a fully processed long screen with black sewn webbing and brass grommets on all four sides, supplied rolled. Knitted eyelets and pressed metal grommets must not be described as the same thing.

Knitted openings along a green fence-screen edge

Roll Delivery Check

Confirm the agreed continuous length, edge configuration and packing method for the supplied roll.

What DAYEE Does: We confirm the roll’s length, edge configuration, continuity and packing method, so buyers who fabricate locally know what they are receiving. Review the Fence Privacy Screen Rolls supply options.

TRAINED WORKSTATIONS · NORMAL CORRECTIONS

Correct Workmanship at the Production Stage

Our finishing team works to established sewing and grommet standards. A neat finish is the normal production requirement, not an extra premium inspection service.

Sewing Corrections

Where sewing does not meet the standard, the stitches are unpicked and the edge is sewn again.

Grommet Resetting

Where a grommetis loose, mispositioned, upturned, burred or otherwise incorrectly pressed, it is removed and properly reset immediately. The aim is to correct workmanship before the screen moves into packing.

What DAYEE Does: Our own sewing and grommet operations allow corrections to be handled within the manufacturing workflow. These examples explain the acceptance standard; they do not imply a particular defect rate, a complicated incident system or repeated manufacturing problems.

SIZE IDENTIFICATION · CORRECT PACKING

Packing Checks for Mixed Sizes and Private-Label Orders

For a distributor, receiving the correct screen in the wrong bag or under the wrong size label creates unnecessary work. Packing accuracy is therefore part of the product we deliver.

For distributor branding and mixed orders, see Wholesale & Private Label Fence Screens and Custom Fence Privacy Screen.

Finished Panel Packing

The buyer can supply approved branding artwork, or our design team can assist with preparing it.

Black fence-screen panels and cartons prepared for supply

Roll Packing

Confirm the ordered roll size, color and specified identification before dispatch.

Dark-green fence-screen roll prepared for project supply

DAYEE cartons used for distributor and private-label packing

Bundle & Carton Checks

Match packed units and outer cartons against the mixed-size order and approved artwork.

DAYEE cartons for distributor and private-label packing

When an order contains different panel dimensions, we generally complete one size group, finish its packing and labels, inspect the packed group, then move to the next size. This keeps the physical product and its identifying information together.

Packing LevelPractical Check
Individual finished panel or rollCorrect color, finished size and specified product identity
Retail bag or unit packAgreed label/artwork, instructions and accessories where included
Bundle or cartonProduct description, packed quantity, contents and agreed markings
Mixed-size shipmentSeparate size groups remain understandable to receiving and warehouse staff

What DAYEE Does: We can combine standard panels, short finished pieces, long rolls and different agreed sizes in one supply program without losing track of what each package contains. See our Wholesale & Private Label Fence Screens page for packaging options.

SEE THE GOODS BEFORE SHIPMENT

Buyer and Third-Party Pre-Shipment Inspection

Buyers do not have to judge workmanship from marketing images alone. Before shipment, we can provide photographs and videos of actual goods and finishing details relevant to the order. Your own QC representative or an appointed third-party inspection company can also arrange a pre-shipment review.

Finished dark-green fence privacy screening panels stacked for supply

Photo, Video & Record Review

Ask for the mesh surface, corners, seams, grommet front and back, finished dimensions, labels and packing that matter to your order.

Our warehouse retains relevant inspection records and can provide the applicable records upon request. A warehouse check is not the same as independent laboratory certification. If a particular laboratory test report is required, discuss the correct product and documentation before placing the order.

Finished dark-green panels stacked for supply

DAYEE shipment loading with wrapped product bales

Buyer or Third-Party Inspection

Where you appoint an inspector, we coordinate the timing and access around the goods being checked. Inspection scope should follow the approved product and shipment requirements.

Wrapped product bales prepared for shipment

What DAYEE Does: We help the buyer review observable workmanship and order conformity before goods leave the factory, without inventing test results or claiming independent certification for every shipment.

MATERIAL · EDGES · GROMMETS

Review a Finished Sample Before a Bulk Order

A finished sample helps you compare the actual net texture, binding, stitching and grommet workmanship. For qualified business inquiries, our standard 130 GSM finished sample is approximately 1 m × 1 m. For this standard sample offer, DAYEE covers the sample and courier charges and normally dispatches within three days after the request and delivery details are confirmed.

Material & Finished Edge Sample

Use the sample to inspect the fabric and workmanship checklist above. Remember that a small sample does not prove the appearance of every color under every light condition, predict site wind performance or replace an inspection of an actual bulk shipment.

Black fence-screen material and finishing detail

Dark-green fence screen corner with black binding and brass grommets

Grommet & Corner Detail

Custom heavy-weight samples or other special configurations may require separate preparation and confirmation; do not assume they follow the standard sample timetable.

What DAYEE Does: You can evaluate tangible finished workmanship before committing to a regular supply specification.

QUALITY QUESTIONS BUYERS OFTEN ASK

Fence Screen Manufacturing & QC FAQs

Fabric GSM measures the mass of the net fabric per square meter. The finished panel also includes sewn binding, sewing thread and grommets. Their total weight must not be substituted for the GSM of the fabric alone.

Look at its position relative to the seam, check that the front and back sit properly and that there is no raised metal edge or burr. The grommet should not rotate loosely by hand. These are shop-floor checks, not a numerical pull-out-strength rating.

Punching through a seam can damage the sewing thread that holds the webbing in place. Our normal practice is to set the grommet between the parallel stitch lines and correct any misplaced or poorly pressed grommet before packing.

Corners and sewn edges are inspected as part of the confirmed finishing. Our regular 7’8″ × 50 ft finished panel commonly uses a middle webbing and grommet reinforcement line. A raw 150 ft roll does not automatically receive the same finish. Confirm the order’s exact construction.

No universal site rating follows from spacing alone. Our regular finished-screen spacing is 24 inches, and other configurations can be discussed. The supporting fence, fixing arrangement, wind exposure and installation practice must also be considered by the installer.

Cutting through an already sewn edge changes the original binding and end finish. Buyers needing local cutting can choose an appropriate roll configuration, or ask us for a finished short piece. The correct choice depends on the intended result.

Our standard delivery requirement is a continuous, unspliced roll. Affected fabric sections with visible manufacturing defects are removed from the delivery run rather than joined into an acceptable roll.

Yes. We can share relevant actual-goods photos and videos and coordinate buyer or appointed third-party inspection. Warehouse inspection records relevant to the order can be provided upon request; a separate laboratory certificate is not assumed.

Yes. We work in identifiable size groups, completing packing and label checks before moving to the next group. Individual packs and outer markings follow the approved order instructions.

For qualified business inquiries, the regular 130 GSM finished sample is approximately 1 m × 1 m, with the sample and courier charges covered by DAYEE. Dispatch is normally within three days after request and delivery details have been confirmed. Special constructions are handled separately. —

FACTORY-DIRECT QUALITY DISCUSSION

Discuss Your Fence Screen Specifications and Inspection Needs

Review the Details Before Shipment

We can review the fabric specification, finished size, stitching, grommet arrangement, edge configuration and packing requirements for your order. If you need sample photos, actual-goods videos, relevant inspection records or a third-party visit, tell us what you would like to verify.

A fabric and finishing specification agreed before production

Real workmanship details you can review

Mixed-size and private-label packing checks

Buyer or third-party pre-shipment inspection options

Send Your Requirements